Use Jameson Live Tracer™ Traceable Rodder with an electrofusion insertion tee to locate live gas mains with no blow by.Connect a transmitter to the Live Tracer™ to energize the unit with a specific frequency. When the energized rod is pushed into the pipe, the signal radiates out to the surface where a receiver detects the frequency.The entire buried pipe can be traced and marked continuously from above ground by one man without digging.
MSRP: $2,600.01
Use Jameson Live Tracer™ Traceable Rodder with an electrofusion insertion tee to locate live gas mains with no blow by.Connect a transmitter to the Live Tracer™ to energize the unit with a specific frequency. When the energized rod is pushed into the pipe, the signal radiates out to the surface where a receiver detects the frequency.The entire buried pipe can be traced and marked continuously from above ground by one man without digging.
No blow-by while feeding rod into live main up to 125 PSI
Less disruption to roads and landscapes
Minimal pavement breakage, excavation and restoration
600 feet of 1/4-inch diameter traceable fiberglass rod marked every 5 feet
Stuffing Box and Accessory Kit included
Dimensions: 36.25″ X 24″ X 13″
| Live Tracer™ Traceable Rodders Brochure |
| LiveTracer™ Manual |
| Tracing Troubleshooting Brochure |
| Duct Hunter & Traceable Rodders Catalog |
| Full Line Catalog |
16-14-600M-GL
MSRP: $2,600.01
