Use Jameson Live Tracer™ Traceable Rodder with transmitter and receiver to locate live plastic gas service lines from meter to main. Connect transmitter to Live Tracer™ to energize unit with specific frequency. When energized rod is pushed into pipe, signal radiates out to surface where a receiver detects the frequency. The entire buried pipe can be traced and marked continuously from above ground by one man without digging.
Questions? Contact Customer Service
Use Jameson Live Tracer™ Traceable Rodder with transmitter and receiver to locate live plastic gas service lines from meter to main. Connect transmitter to Live Tracer™ to energize unit with specific frequency. When energized rod is pushed into pipe, signal radiates out to surface where a receiver detects the frequency. The entire buried pipe can be traced and marked continuously from above ground by one man without digging.
The 1/8″ rod is able to get past 90-degree elbows
Stuffing Box attaches to any riser
No blow-by while feeding rod into live line up to 125 PSI
Small bullet tip guides rod from riser to service transition
Use with transmitter & receiver to trace gas line from above ground
150 ft. of 1/8-inch diameter traceable fiberglass rod
Stuffing Box and Accessory Kit included
Dimensions: 22″ X 17″ X 7″
| Live Tracer™ Traceable Rodders Brochure |
| Live Tracer™ Gas Service 18 Manual |
| Tracing Troubleshooting Brochure |
| Duct Hunter & Traceable Rodders Catalog |
| Full Line Catalog |
15-18-250-GL
